Arrow Research search

Author name cluster

Zhipeng Zhou

Possible papers associated with this exact author name in Arrow. This page groups case-insensitive exact name matches and is not a full identity disambiguation profile.

13 papers
2 author rows

Possible papers

13

NeurIPS Conference 2025 Conference Paper

Continual Optimization with Symmetry Teleportation for Multi-Task Learning

  • Zhipeng Zhou
  • Ziqiao Meng
  • Pengcheng Wu
  • Peilin Zhao
  • Chunyan Miao

Multi-task learning (MTL) is a widely explored paradigm that enables the simultaneous learning of multiple tasks using a single model. Despite numerous solutions, the key issues of optimization conflict and task imbalance remain under-addressed, limiting performance. Unlike existing optimization-based approaches that typically reweight task losses or gradients to mitigate conflicts or promote progress, we propose a novel approach based on Continual Optimization with Symmetry Teleportation (COST). During MTL optimization, when an optimization conflict arises, we seek an alternative loss-equivalent point on the loss landscape to reduce conflict. Specifically, we utilize a low-rank adapter (LoRA) to facilitate this practical teleportation by designing convergent, loss-invariant objectives. Additionally, we introduce a historical trajectory reuse strategy to continually leverage the benefits of advanced optimizers. Extensive experiments on multiple mainstream datasets demonstrate the effectiveness of our approach. COST is a plug-and-play solution that enhances a wide range of existing MTL methods. When integrated with state-of-the-art methods, COST achieves superior performance.

NeurIPS Conference 2025 Conference Paper

Exploring Tradeoffs through Mode Connectivity for Multi-Task Learning

  • Zhipeng Zhou
  • Ziqiao Meng
  • Pengcheng Wu
  • Peilin Zhao
  • Chunyan Miao

Nowadays deep models are required to be versatile due to the increasing realistic needs. Multi-task learning (MTL) offers an efficient way for this purpose to learn multiple tasks simultaneously with a single model. However, prior MTL solutions often focus on resolving conflicts and imbalances during optimization, which may not outperform simple linear scalarization strategies~\citep{xin2022current}. Instead of altering the optimization trajectory, this paper leverages mode connectivity to efficiently approach the Pareto front and identify the desired trade-off point. Unlike Pareto Front Learning (PFL), which aims to align with the entire Pareto front, we focus on effectively and efficiently exploring optimal trade-offs. However, three challenges persist: (1) the low-loss path can neither fully traverse trade-offs nor align with user preference due to its randomness, (2) commonly adopted Bézier curves in mode connectivity are ill-suited to navigating the complex loss landscapes of deep models, and (3) poor scalability to large-scale task scenarios. To address these challenges, we adopt non-uniform rational B-Splines (NURBS) to model mode connectivity, allowing for more flexible and precise curve optimization. Additionally, we introduce an order-aware objective to explore task loss trade-offs and employ a task grouping strategy to enhance scalability under massive task scenarios. Extensive experiments on key MTL datasets demonstrate that our proposed method, EXTRA (EXplore TRAde-offs), effectively identifies the desired point on the Pareto front and achieves state-of-the-art performance. EXTRA is also validated as a plug-and-play solution for mainstream MTL approaches.

IJCAI Conference 2025 Conference Paper

Injecting Imbalance Sensitivity for Multi-Task Learning

  • Zhipeng Zhou
  • Liu Liu
  • Peilin Zhao
  • Wei Gong

Multi-task learning (MTL) has emerged as a promising approach for deploying deep learning models in real-life applications. Recent studies have proposed optimization-based learning paradigms to establish task-shared representations in MTL. However, our paper empirically argues that these studies, specifically gradient-based ones, primarily emphasize the conflict issue while neglecting the potentially more significant impact of imbalance/dominance in MTL. In line with this perspective, we enhance the existing baseline method by injecting imbalance-sensitivity through the imposition of constraints on the projected norms. To demonstrate the effectiveness of our proposed IMbalance-sensitive Gradient (IMGrad) descent method, we evaluate it on multiple mainstream MTL benchmarks, encompassing supervised learning tasks as well as reinforcement learning. The experimental results consistently demonstrate competitive performance.

ICLR Conference 2024 Conference Paper

Hybrid Directional Graph Neural Network for Molecules

  • Junyi An
  • Chao Qu
  • Zhipeng Zhou
  • Fenglei Cao
  • Yinghui Xu 0001
  • Yuan (Alan) Qi
  • Furao Shen

Equivariant message passing neural networks have emerged as the prevailing approach for predicting chemical properties of molecules due to their ability to leverage translation and rotation symmetries, resulting in a strong inductive bias. However, the equivariant operations in each layer can impose excessive constraints on the function form and network flexibility. To address these challenges, we introduce a novel network called the Hybrid Directional Graph Neural Network (HDGNN), which effectively combines strictly equivariant operations with learnable modules. We evaluate the performance of HDGNN on the QM9 dataset and the IS2RE dataset of OC20, demonstrating its state-of-the-art performance on several tasks and competitive performance on others. Our code is anonymously released on https://github.com/ajy112/HDGNN.

ICLR Conference 2024 Conference Paper

Pareto Deep Long-Tailed Recognition: A Conflict-Averse Solution

  • Zhipeng Zhou
  • Liu Liu 0014
  • Peilin Zhao
  • Wei Gong 0001

Deep long-tailed recognition (DTLR) has attracted much attention due to its close touch with realistic scenarios. Recent advances have focused on re-balancing across various aspects, e.g., sampling strategy, loss re-weighting, logit adjustment, and input/parameter perturbation, to name a few. However, few studies have considered dynamic re-balancing to address intrinsic optimization conflicts. In this paper, we first empirically argue that the optimizations of mainstream DLTR methods are still dominated by some categories (e.g., major) due to a fixed re-balancing strategy. Thus, they fail to deal with gradient conflicts among categories, which naturally deduces the motivation for reaching Pareto optimal solutions. Unfortunately, a naive integration of multi-objective optimization (MOO) with DLTR methods is not applicable due to the gap between multi-task learning (MTL) and DLTR, and can in turn lead to class-specific feature degradation. Thus, we provide effective alternatives by decoupling MOO-based MTL from the temporal rather than structure perspective, and enhancing it via optimizing variability collapse loss motivated by the derived MOO-based DLTR generalization bound. Moreover, we resort to anticipating worst-case optimization with theoretical insights to further ensure convergence. We build a Pareto deep long-tailed recognition method termed PLOT upon the proposed MOO framework. Extensive evaluations demonstrate that our method not only generally improves mainstream pipelines, but also achieves an augmented version to realize state-of-the-art performance across multiple benchmarks.

IJCAI Conference 2023 Conference Paper

CostFormer: Cost Transformer for Cost Aggregation in Multi-view Stereo

  • Weitao Chen
  • Hongbin Xu
  • Zhipeng Zhou
  • Yang Liu
  • Baigui Sun
  • Wenxiong Kang
  • Xuansong Xie

The core of Multi-view Stereo(MVS) is the matching process among reference and source pixels. Cost aggregation plays a significant role in this process, while previous methods focus on handling it via CNNs. This may inherit the natural limitation of CNNs that fail to discriminate repetitive or incorrect matches due to limited local receptive fields. To handle the issue, we aim to involve Transformer into cost aggregation. However, another problem may occur due to the quadratically growing computational complexity caused by Transformer, resulting in memory overflow and inference latency. In this paper, we overcome these limits with an efficient Transformer-based cost aggregation network, namely CostFormer. The Residual Depth-Aware Cost Transformer(RDACT) is proposed to aggregate long-range features on cost volume via self-attention mechanisms along the depth and spatial dimensions. Furthermore, Residual Regression Transformer(RRT) is proposed to enhance spatial attention. The proposed method is a universal plug-in to improve learning-based MVS methods.

AAAI Conference 2022 Conference Paper

Scaled ReLU Matters for Training Vision Transformers

  • Pichao Wang
  • Xue Wang
  • Hao Luo
  • Jingkai Zhou
  • Zhipeng Zhou
  • Fan Wang
  • Hao Li
  • Rong Jin

Vision transformers (ViTs) have been an alternative design paradigm to convolutional neural networks (CNNs). However, the training of ViTs is much harder than CNNs, as it is sensitive to the training parameters, such as learning rate, optimizer and warmup epoch. The reasons for training difficulty are empirically analysed in the paper Early Convolutions Help Transformers See Better, and the authors conjecture that the issue lies with the patchify-stem of ViT models. In this paper, we further investigate this problem and extend the above conclusion: only early convolutions do not help for stable training, but the scaled ReLU operation in the convolutional stem (conv-stem) matters. We verify, both theoretically and empirically, that scaled ReLU in conv-stem not only improves training stabilization, but also increases the diversity of patch tokens, thus boosting peak performance with a large margin via adding few parameters and flops. In addition, extensive experiments are conducted to demonstrate that previous ViTs are far from being well trained, further showing that ViTs have great potential to be a better substitute of CNNs.

AAAI Conference 2021 Conference Paper

Investigate Indistinguishable Points in Semantic Segmentation of 3D Point Cloud

  • Mingye Xu
  • Zhipeng Zhou
  • Junhao Zhang
  • Yu Qiao

This paper investigates the indistinguishable points (difficult to predict label) in semantic segmentation for large-scale 3D point clouds. The indistinguishable points consist of those located in complex boundary, points with similar local textures but different categories, and points in isolate small hard areas, which largely harm the performance of 3D semantic segmentation. To address this challenge, we propose a novel Indistinguishable Area Focalization Network (IAF-Net), which select indistinguishable points adaptively by utilizing the hierarchical semantic features and enhance fine-grained features for points especially those indistinguishable points. We also introduce multi-stage loss to improve the feature representation in a progressive way. Moreover, in order to analyze the segmentation performances of indistinguishable areas, we propose a new evaluation metric called Indistinguishable Points Based Metric (IPBM). Our IAF-Net achieves the comparable results with state-of-the-art performance on several popular 3D point cloud datasets e. g. S3DIS and ScanNet, and clearly outperform other methods on IPBM. Our code will be available at https: //github. com/MingyeXu/IAF-Net

AAAI Conference 2021 Conference Paper

Learning Geometry-Disentangled Representation for Complementary Understanding of 3D Object Point Cloud

  • Mutian Xu
  • Junhao Zhang
  • Zhipeng Zhou
  • Mingye Xu
  • Xiaojuan Qi
  • Yu Qiao

In 2D image processing, some attempts decompose images into high and low frequency components for describing edge and smooth parts respectively. Similarly, the contour and flat area of 3D objects, such as the boundary and seat area of a chair, describe different but also complementary geometries. However, such investigation is lost in previous deep networks that understand point clouds by directly treating all points or local patches equally. To solve this problem, we propose Geometry-Disentangled Attention Network (GDANet). GDANet introduces Geometry-Disentangle Module to dynamically disentangle point clouds into the contour and flat part of 3D objects, respectively denoted by sharp and gentle variation components. Then GDANet exploits Sharp-Gentle Complementary Attention Module that regards the features from sharp and gentle variation components as two holistic representations, and pays different attentions to them while fusing them respectively with original point cloud features. In this way, our method captures and refines the holistic and complementary 3D geometric semantics from two distinct disentangled components to supplement the local information. Extensive experiments on 3D object classification and segmentation benchmarks demonstrate that GDANet achieves the state-of-the-arts with fewer parameters. Code is released on https: //github. com/mutianxu/GDANet.

AAAI Conference 2021 Conference Paper

PC-HMR: Pose Calibration for 3D Human Mesh Recovery from 2D Images/Videos

  • Tianyu Luan
  • Yali Wang
  • Junhao Zhang
  • Zhe Wang
  • Zhipeng Zhou
  • Yu Qiao

The end-to-end Human Mesh Recovery (HMR) approach (Kanazawa et al. 2018) has been successfully used for 3D body reconstruction. However, most HMR-based frameworks reconstruct human body by directly learning mesh parameters from images or videos, while lacking explicit guidance of 3D human pose in visual data. As a result, the generated mesh often exhibits incorrect pose for complex activities. To tackle this problem, we propose to exploit 3D pose to calibrate human mesh. Specifically, we develop two novel Pose Calibration frameworks, i. e. , Serial PC-HMR and Parallel PC-HMR. By coupling advanced 3D pose estimators and HMR in a serial or parallel manner, these two frameworks can effectively correct human mesh with guidance of a concise pose calibration module. Furthermore, since the calibration module is designed via non-rigid pose transformation, our PC- HMR frameworks can flexibly tackle bone length variations to alleviate misplacement in the calibrated mesh. Finally, our frameworks are based on generic and complementary integration of data-driven learning and geometrical modeling. Via plug-and-play modules, they can be efficiently adapted for both image/video-based human mesh recovery. Additionally, they have no requirement of extra 3D pose annotations in the testing phase, which releases inference difficulties in practice. We perform extensive experiments on the popular benchmarks, i. e. , Human3. 6M, 3DPW and SURREAL, where our PC-HMR frameworks achieve the SOTA results.

ICRA Conference 2021 Conference Paper

Reinforcement Learning for Orientation Estimation Using Inertial Sensors with Performance Guarantee

  • Liang Hu 0002
  • Yujie Tang 0004
  • Zhipeng Zhou
  • Wei Pan 0004

This paper presents a deep reinforcement learning (DRL) algorithm for orientation estimation using inertial sensors combined with a magnetometer. Lyapunov’s method in control theory is employed to prove the convergence of orientation estimation errors. The estimator gains and a Lyapunov function are parametrised by deep neural networks and learned from samples based on the theoretical results. The DRL estimator is compared with three well-known orientation estimation methods on both numerical simulations and real dataset collected from commercially available sensors. The results show that the proposed algorithm is superior for arbitrary estimation initialisation and can adapt to a drastic angular velocity profile for which other algorithms can be hardly applicable. To the best of our knowledge, this is the first DRL-based orientation estimation method with an estimation error boundedness guarantee.

AAAI Conference 2021 Conference Paper

Self-supervised Multi-view Stereo via Effective Co-Segmentation and Data-Augmentation

  • Hongbin Xu
  • Zhipeng Zhou
  • Yu Qiao
  • Wenxiong Kang
  • Qiuxia Wu

Recent studies have witnessed that self-supervised methods based on view synthesis obtain clear progress on multiview stereo (MVS). However, existing methods rely on the assumption that the corresponding points among different views share the same color, which may not always be true in practice. This may lead to unreliable self-supervised signal and harm the final reconstruction performance. To address the issue, we propose a framework integrated with more reliable supervision guided by semantic co-segmentation and dataaugmentation. Specially, we excavate mutual semantic from multi-view images to guide the semantic consistency. And we devise effective data-augmentation mechanism which ensures the transformation robustness by treating the prediction of regular samples as pseudo ground truth to regularize the prediction of augmented samples. Experimental results on DTU dataset show that our proposed methods achieve the state-of-the-art performance among unsupervised methods, and even compete on par with supervised methods. Furthermore, extensive experiments on Tanks&Temples dataset demonstrate the effective generalization ability of the proposed method. The code is released at: https: //github. com/ ToughStoneX/Self-Supervised-MVS.

AAAI Conference 2020 Conference Paper

Geometry Sharing Network for 3D Point Cloud Classification and Segmentation

  • Mingye Xu
  • Zhipeng Zhou
  • Yu Qiao

In spite of the recent progresses on classifying 3D point cloud with deep CNNs, large geometric transformations like rotation and translation remain challenging problem and harm the final classification performance. To address this challenge, we propose Geometry Sharing Network (GS-Net) which effectively learns point descriptors with holistic context to enhance the robustness to geometric transformations. Compared with previous 3D point CNNs which perform convolution on nearby points, GS-Net can aggregate point features in a more global way. Specially, GS-Net consists of Geometry Similarity Connection (GSC) modules which exploit Eigen-Graph to group distant points with similar and relevant geometric information, and aggregate features from nearest neighbors in both Euclidean space and Eigenvalue space. This design allows GS-Net to efficiently capture both local and holistic geometric features such as symmetry, curvature, convexity and connectivity. Theoretically, we show the nearest neighbors of each point in Eigenvalue space are invariant to rotation and translation. We conduct extensive experiments on public datasets, ModelNet40, ShapeNet Part. Experiments demonstrate that GS-Net achieves the state-of-the-art performances on major datasets, 93. 3% on ModelNet40, and are more robust to geometric transformations.

v2026.09.13