Author name cluster

François Pomerleau

Possible papers associated with this exact author name in Arrow. This page groups case-insensitive exact name matches and is not a full identity disambiguation profile.

25 papers

1 author row

ICRA Conference 2025 Conference Paper

UAV-Assisted Self-Supervised Terrain Awareness for Off-Road Navigation

Jean-Michel Fortin
Olivier Gamache
William Fecteau
Effie Daum
William Larrivée-Hardy
François Pomerleau
Philippe Giguère

Terrain awareness is an essential milestone to enable truly autonomous off-road navigation. Accurately predicting terrain characteristics allows optimizing a vehicle's path against potential hazards. Recent methods use deep neural networks to predict terrain properties in a self-supervised manner, relying on proprioception as a training signal. However, onboard cameras are inherently limited by their point-ofview relative to the ground, suffering from occlusions and vanishing pixel density with distance. This paper introduces a novel approach for self-supervised terrain characterization using an aerial perspective from a hovering drone. We capture terrain-aligned images while sampling the environment with a ground vehicle, effectively training a simple predictor for vibrations, bumpiness, and energy consumption. Our dataset includes 2. 8 km of off-road data collected in forest environment, comprising 13484 ground-based images and 12935 aerial images. Our findings show that drone imagery improves terrain property prediction by 21. 37% on the whole dataset and 37. 35% in high vegetation, compared to ground robot images. We conduct ablation studies to identify the main causes of these performance improvements. We also demonstrate the realworld applicability of our approach by scouting an unseen area with a drone, planning and executing an optimized path on the ground.

ICRA Conference 2025 Conference Paper

Under Pressure: Altimeter-Aided ICP for 3D Maps Consistency

William Dubois
Nicolas Samson
Effie Daum
Johann Laconte
François Pomerleau

We propose a novel method to enhance the accuracy of the Iterative Closest Point (ICP) algorithm by integrating altitude constraints from a barometric pressure sensor. While ICP is widely used in mobile robotics for Simultaneous Localization and Mapping (SLAM), it is susceptible to drift, especially in underconstrained environments such as vertical shafts. To address this issue, we propose to augment ICP with altimeter measurements, reliably constraining drifts along the gravity vector. To demonstrate the potential of altimetry in SLAM, we offer an analysis of calibration procedures and noise sensitivity of various pressure sensors, improving measurements to centimeter-level accuracy. Leveraging this accuracy, we propose a novel ICP formulation that integrates altitude measurements along the gravity vector, thus simplifying the optimization problem to 3-Degree Of Freedom (DOF). Experimental results from real-world deployments demonstrate that our method reduces vertical drift by 84% and improves overall localization accuracy compared to state-of-the-art methods in non-planar environments.

ICRA Conference 2024 Conference Paper

DRIVE: Data-driven Robot Input Vector Exploration

Dominic Baril
Simon-Pierre Deschênes
Luc Coupal
Cyril Goffin
Julien Lépine
Philippe Giguère
François Pomerleau

An accurate motion model is a fundamental component of most autonomous navigation systems. While much work has been done on improving model formulation, no standard protocol exists for gathering empirical data required to train models. In this work, we address this issue by proposing Data-driven Robot Input Vector Exploration (DRIVE), a protocol that enables characterizing uncrewed ground vehicles (UGVs) input limits and gathering empirical model training data. We also propose a novel learned slip approach outperforming similar acceleration learning approaches. Our contributions are validated through an extensive experimental evaluation, cumulating over 7km and 1. 8h of driving data over three distinct UGVs and four terrain types. We show that our protocol offers increased predictive performance over common human-driven data-gathering protocols. Furthermore, our protocol converges with 46 s of training data, almost four times less than the shortest human dataset gathering protocol. We show that the operational limit for our model is reached in extreme slip conditions encountered on surfaced ice. DRIVE is an efficient way of characterizing UGV motion in its operational conditions. Our code and dataset are both available online at this link: https://github.com/norlab-ulaval/DRIVE.

IROS Conference 2024 Conference Paper

Exposing the Unseen: Exposure Time Emulation for Offline Benchmarking of Vision Algorithms

Olivier Gamache
Jean-Michel Fortin
Matej Boxan
Maxime Vaidis
François Pomerleau
Philippe Giguère

Visual Odometry (VO) is one of the fundamental tasks in computer vision for robotics. However, its performance is deeply affected by High Dynamic Range (HDR) scenes, omnipresent outdoor. While new Automatic-Exposure (AE) approaches to mitigate this have appeared, their comparison in a reproducible manner is problematic. This stems from the fact that the behavior of AE depends on the environment, and it affects the image acquisition process. Consequently, AE has traditionally only been benchmarked in an online manner, making the experiments non-reproducible. To solve this, we propose a new methodology based on an emulator that can generate images at any exposure time. It leverages BorealHDR, a unique multi-exposure stereo dataset collected over 10 km, on 55 trajectories with challenging illumination conditions. Moreover, it includes lidar-inertial-based global maps with pose estimation for each image frame as well as Global Navigation Satellite System (GNSS) data, for comparison. We show that using these images acquired at different exposure times, we can emulate realistic images, keeping a Root-Mean-Square Error (RMSE) below 1. 78 % compared to ground truth images. To demonstrate the practicality of our approach for offline benchmarking, we compared three state-of-the-art AE algorithms on key elements of Visual Simultaneous Localization And Mapping (VSLAM) pipeline, against four baselines. Consequently, reproducible evaluation of AE is now possible, speeding up the development of future approaches. Our code and dataset are available on-line at this link: https://github.com/norlab-ulaval/BorealHDR

IROS Conference 2024 Conference Paper

Proprioception Is All You Need: Terrain Classification for Boreal Forests

Damien LaRocque
William Guimont-Martin
David-Alexandre Duclos
Philippe Giguère
François Pomerleau

Recent works in field robotics highlighted the importance of resiliency against different types of terrains. Boreal forests, in particular, are home to many mobility-impeding terrains that should be considered for off-road autonomous navigation. Also, being one of the largest land biomes on Earth, boreal forests are an area where autonomous vehicles are expected to become increasingly common. In this paper, we address the issue of classifying boreal terrains by introducing BorealTC, a publicly available dataset for proprioceptive-based terrain classification (TC). Recorded with a Husky A200, our dataset contains 116 min of Inertial Measurement Unit (IMU), motor current, and wheel odometry data, focusing on typical boreal forest terrains, notably snow, ice, and silty loam. Combining our dataset with another dataset from the literature, we evaluate both a Convolutional Neural Network (CNN) and the novel state space model (SSM)-based Mamba architecture on a TC task. We show that while CNN outperforms Mamba on each separate dataset, Mamba achieves greater accuracy when trained on a combination of both. In addition, we demonstrate that Mamba’s learning capacity is greater than a CNN for increasing amounts of data. We show that the combination of two TC datasets yields a latent space that can be interpreted with the properties of the terrains. We also discuss the implications of merging datasets on classification. Our source code and dataset are publicly available online: https://github.com/norlab-ulaval/BorealTC.

ICRA Conference 2024 Conference Paper

RTS-GT: Robotic Total Stations Ground Truthing dataset

Maxime Vaidis
Mohsen Hassanzadeh Shahraji
Effie Daum
William Dubois
Philippe Giguère
François Pomerleau

Numerous datasets and benchmarks exist to assess and compare Simultaneous Localization and Mapping (SLAM) algorithms. Nevertheless, their precision must follow the rate at which SLAM algorithms improved in recent years. Moreover, current datasets fall short of comprehensive data-collection protocol for reproducibility and the evaluation of the precision or accuracy of the recorded trajectories. With this objective in mind, we proposed the Robotic Total Stations Ground Truthing dataset (RTS-GT) dataset to support localization research with the generation of six-Degrees Of Freedom (DOF) ground truth trajectories. This novel dataset includes six-DOF ground truth trajectories generated using a system of three Robotic Total Stations (RTSs) tracking moving robotic platforms. Furthermore, we compare the performance of the RTS-based system to a Global Navigation Satellite System (GNSS)-based setup. The dataset comprises around sixty experiments conducted in various conditions over a period of 17 months, and encompasses over 49 kilometers of trajectories, making it the most extensive dataset of RTS-based measurements to date. Additionally, we provide the precision of all poses for each experiment, a feature not found in the current state-of-the-art datasets. Our results demonstrate that RTSs provide measurements that are 22 times more stable than GNSS in various environmental settings, making them a valuable resource for SLAM benchmark development.

ICRA Conference 2024 Conference Paper

Saturation-Aware Angular Velocity Estimation: Extending the Robustness of SLAM to Aggressive Motions

Simon-Pierre Deschênes
Dominic Baril
Matej Boxan
Johann Laconte
Philippe Giguère
François Pomerleau

We propose a novel angular velocity estimation method to increase the robustness of Simultaneous Localization And Mapping (SLAM) algorithms against gyroscope saturations induced by aggressive motions. Field robotics expose robots to various hazards, including steep terrains, landslides, and staircases, where substantial accelerations and angular velocities can occur if the robot loses stability and tumbles. These extreme motions can saturate sensor measurements, especially gyroscopes, which are the first sensors to become inoperative. While the structural integrity of the robot is at risk, the robustness of the SLAM framework is oftentimes given little consideration. Consequently, even if the robot is physically capable of continuing the mission, its operation will be compromised due to a corrupted representation of the world. Regarding this problem, we propose a method to estimate the angular velocity using accelerometers during extreme rotations caused by tumbling. We show that our method reduces the median localization error by 71. 5 % in translation and 65. 5 % in rotation and is robust to mapping failures, which occurred in 37. 5 % of the experiments without our method. We also propose the Tumbling-Induced Gyroscope Saturation (TIGS) dataset, which consists of outdoor experiments recording the motion of a mechanical lidar subject to angular velocities four times higher than other similar datasets available. The dataset is available online at https://github.com/norlab-ulaval/Norlab_wiki/wiki/TIGS-Dataset.

ICRA Conference 2023 Conference Paper

Extrinsic calibration for highly accurate trajectories reconstruction

Maxime Vaidis
William Dubois
Alexandre Guénette
Johann Laconte
Vladimír Kubelka
François Pomerleau

In the context of robotics, accurate ground-truth positioning is the cornerstone for the development of mapping and localization algorithms. In outdoor environments and over long distances, total stations provide accurate and precise measurements, that are unaffected by the usual factors that deteriorate the accuracy of Global Navigation Satellite System (GNSS). While a single robotic total station can track the position of a target in three Degrees Of Freedom (DOF), three robotic total stations and three targets are necessary to yield the full six DOF pose reference. Since it is crucial to express the position of targets in a common coordinate frame, we present a novel extrinsic calibration method of multiple robotic total stations with field deployment in mind. The proposed method does not require the manual collection of ground control points during the system setup, nor does it require tedious synchronous measurement on each robotic total station. Based on extensive experimental work, we compare our approach to the classical extrinsic calibration methods used in geomatics for surveying and demonstrate that our approach brings substantial time savings during the deployment. Tested on more than 30 km of trajectories, our new method increases the precision of the extrinsic calibration by 25 % compared to the best state-of-the-art method, which is the one taking manually static ground control points.

IROS Conference 2023 Conference Paper

MaskBEV: Joint Object Detection and Footprint Completion for Bird's-Eye View 3D Point Clouds

William Guimont-Martin
Jean-Michel Fortin
François Pomerleau
Philippe Giguère

Recent works in object detection in LiDAR point clouds mostly focus on predicting bounding boxes around objects. This prediction is commonly achieved using anchor-based or anchor-free detectors that predict bounding boxes, requiring significant explicit prior knowledge about the objects to work properly. To remedy these limitations, we propose MaskBEV, a bird's-eye view (BEV) mask-based object detector neural architecture. MaskBEV predicts a set of BEV instance masks that represent the footprints of detected objects. Moreover, our approach allows object detection and footprint completion in a single pass. MaskBEV also reformulates the detection problem purely in terms of classification, doing away with regression usually done to predict bounding boxes. We evaluate the performance of MaskBEV on both SemanticKITTI and KITTI datasets while analyzing the architecture advantages and limitations.

IROS Conference 2023 Conference Paper

Uncertainty Analysis for Accurate Ground Truth Trajectories with Robotic Total Stations

Maxime Vaidis
William Dubois
Effie Daum
Damien LaRocque
François Pomerleau

In the context of robotics, accurate ground truth positioning is essential for the development of Simultaneous Localization and Mapping (SLAM) and control algorithms. Robotic Total Stations (RTSs) provide accurate and precise reference positions in different types of outdoor environments, especially when compared to the limited accuracy of Global Navigation Satellite System (GNSS) in cluttered areas. Three RTSs give the possibility to obtain the six-Degrees Of Freedom (DOF) reference pose of a robotic platform. However, the uncertainty of every pose is rarely computed for trajectory evaluation. As evaluation algorithms are getting increasingly precise, it becomes crucial to take into account this uncertainty. We propose a method to compute this six-DOF uncertainty from the fusion of three RTSs based on Monte Carlo (MC) methods. This solution relies on point-to-point minimization to propagate the noise of RTSs on the pose of the robotic platform. Five main noise sources are identified to model this uncertainty: noise inherent to the instrument, tilt noise, atmospheric factors, time synchronization noise, and extrinsic calibration noise. Based on extensive experimental work, we compare the impact of each noise source on the prism uncertainty and the final estimated pose. Tested on more than 50 km of trajectories, our comparison highlighted the importance of the calibration noise and the measurement distance, which should be ideally under 75 m. Moreover, it has been noted that the uncertainty on the pose of the robot is not prominently affected by one particular noise source, compared to the others.

IROS Conference 2022 Conference Paper

Gravity-constrained point cloud registration

Vladimír Kubelka
Maxime Vaidis
François Pomerleau

Visual and lidar Simultaneous Localization and Mapping (SLAM) algorithms benefit from the Inertial Measurement Unit (IMU) modality. The high-rate inertial data complement the other lower-rate modalities. Moreover, in the absence of constant acceleration, the gravity vector makes two attitude angles out of three observable in the global coordinate frame. In visual odometry, this is already being used to reduce the 6-Degrees Of Freedom (DOF) pose estimation problem to 4-DOF. In lidar SLAM, the gravity measurements are often used as a penalty in the back-end global map optimization to prevent map deformations. In this work, we propose an Iterative Closest Point (ICP)-based front-end which exploits the observable DOF and provides pose estimates aligned with the gravity vector. We believe that this front-end has the potential to support the loop closure identification, thus speeding up convergences of global map optimizations. The presented approach has been extensively tested against accurate ground-truth localization in large-scale outdoor environments as well as in the Subterranean Challenge organized by Defense Advanced Research Projects Agency (DARPA). We show that it can reduce the localization drift by 30% when compared to the standard 6-DOF ICP. Moreover, the code is readily available to the community as a part of the libpointmatcher library.

IROS Conference 2022 Conference Paper

Instance Segmentation for Autonomous Log Grasping in Forestry Operations

Jean-Michel Fortin
Olivier Gamache
Vincent Grondin
François Pomerleau
Philippe Giguère

Wood logs picking is a challenging task to automate. Indeed, logs usually come in cluttered configurations, randomly orientated and overlapping. Recent work on log picking automation usually assume that the logs' pose is known, with little consideration given to the actual perception problem. In this paper, we squarely address the latter, using a data-driven approach. First, we introduce a novel dataset, named TimberSeg 1. 0, that is densely annotated, i. e. , that includes both bounding boxes and pixel-level mask annotations for logs. This dataset comprises 220 images with 2500 individually segmented logs. Using our dataset, we then compare three neural network architectures on the task of individual logs detection and segmentation; two region-based methods and one attention-based method. Unsurprisingly, our results show that axis-aligned proposals, failing to take into account the directional nature of logs, underperform with 19. 03 mAP. A rotation-aware proposal method significantly improve results to 31. 83 mAP. More interestingly, a Transformer-based approach, without any inductive bias on rotations, outperformed the two others, achieving a mAP of 57. 53 on our dataset. Our use case demonstrates the limitations of region-based approaches for cluttered, elongated objects. It also highlights the potential of attention-based methods on this specific task, as they work directly at the pixel-level. These encouraging results indicate that such a perception system could be used to assist the operators on the short-term, or to fully automate log picking operations in the future.

IROS Conference 2021 Conference Paper

Dynamic Lambda-Field: A Counterpart of the Bayesian Occupancy Grid for Risk Assessment in Dynamic Environments

Johann Laconte
Elie Randriamiarintsoa
Abderrahim Kasmi
François Pomerleau
Roland Chapuis
Christophe Debain
Romuald Aufrère

In the context of autonomous vehicles, one of the most crucial tasks is to estimate the risk of the undertaken action. While navigating in complex urban environments, the Bayesian occupancy grid is one of the most popular types of maps, where the information of occupancy is stored as the probability of collision. Although widely used, this kind of representation is not well suited for risk assessment: because of its discrete nature, the probability of collision becomes dependent on the tessellation size. Therefore, risk assessments on Bayesian occupancy grids cannot yield risks with meaningful physical units. In this article, we propose an alternative framework called Dynamic Lambda-Field that is able to assess generic physical risks in dynamic environments without being dependent on the tessellation size. Using our framework, we are able to plan safe trajectories where the risk function can be adjusted depending on the scenario. We validate our approach with quantitative experiments, showing the convergence speed of the grid and that the framework is suitable for real-world scenarios.

ICRA Conference 2019 Conference Paper

Analysis of Robust Functions for Registration Algorithms

Philippe Babin
Philippe Giguère
François Pomerleau

Registration accuracy is influenced by the presence of outliers and numerous robust solutions have been developed over the years to mitigate their effect. However, without a large scale comparison of solutions to filter outliers, it is becoming tedious to select an appropriate algorithm for a given application. This paper presents a comprehensive analysis of the effects of outlier filters on the Iterative Closest Point (ICP) algorithm aimed at a mobile robotic application. Fourteen of the most common outlier filters (such as M-estimators) have been tested in different types of environments, for a total of more than two million registrations. Furthermore, the influence of tuning parameters has been thoroughly explored. The experimental results show that most outlier filters have a similar performance if they are correctly tuned. Nonetheless, filters such as Var. Trim. , Cauchy, and Cauchy MAD are more stable against different environment types. Interestingly, the simple norm L 1 produces comparable accuracy, while being parameterless.

ICRA Conference 2019 Conference Paper

CELLO-3D: Estimating the Covariance of ICP in the Real World

David Landry
François Pomerleau
Philippe Giguère

The fusion of Iterative Closest Point (ICP) registrations in existing state estimation frameworks relies on an accurate estimation of their uncertainty. In this paper, we study the estimation of this uncertainty in the form of a covariance. First, we scrutinize the limitations of existing closed-form covariance estimation algorithms over 3D datasets. Then, we set out to estimate the covariance of ICP registrations through a data-driven approach, with over 5100000 registrations on 1020 pairs from real 3D point clouds. We assess our solution upon a wide spectrum of environments, ranging from structured to unstructured and indoor to outdoor. The capacity of our algorithm to predict covariances is accurately assessed, as well as the usefulness of these estimations for uncertainty estimation over trajectories. The proposed method estimates covariances better than existing closed-form solutions, and makes predictions that are consistent with observed trajectories.

IROS Conference 2019 Conference Paper

Lambda-Field: A Continuous Counterpart of the Bayesian Occupancy Grid for Risk Assessment

Johann Laconte
Christophe Debain
Roland Chapuis
François Pomerleau
Romuald Aufrère

In a context of autonomous robots, one of the most important tasks is to ensure the safety of the robot and its surrounding. The risk of navigation is usually said to be the probability of collision. This notion of risk is not well defined in the literature, especially when dealing with occupancy grids. The Bayesian occupancy grid is the most used method to deal with complex environments. However, this is not fitted to compute the risk along a path by its discrete nature. In this article, we present a new way to store the occupancy of the environment that allows the computation of risk along a given path. We then define the risk as the force of collision that would occur for a given obstacle. Using this framework, we are able to generate navigation paths ensuring the safety of the robot.

ICRA Conference 2019 Conference Paper

Lidar Measurement Bias Estimation via Return Waveform Modelling in a Context of 3D Mapping

Johann Laconte
Simon-Pierre Deschênes
Mathieu Labussière
François Pomerleau

In a context of 3D mapping, it is very important to obtain accurate measurements from sensors. In particular, Light Detection And Ranging (LIDAR) measurements are typically treated as a zero-mean Gaussian distribution. We show that this assumption leads to predictable localisation drifts, especially when a bias related to measuring obstacles with high incidence angles is not taken into consideration. Moreover, we present a way to physically understand and model this bias, which generalizes to multiple sensors. Using an experimental setup, we measured the bias of the Sick LMS151, Velodyne HDL-32E, and Robosense RS-LiDAR-16 as a function of depth and incidence angle, and showed that the bias can reach 20 cm for high incidence angles. We then used our model to remove the bias from the measurements, leading to more accurate maps and a reduced localisation drift.

ICRA Conference 2016 Conference Paper

The line leading the blind: Towards nonvisual localization and mapping for tethered mobile robots

Patrick McGarey
Kirk MacTavish
François Pomerleau
Tim D. Barfoot

Mobile robots supported by an electromechanical tether can safely explore extremely rugged terrain in resource-limited environments. While a tether provides power, wired communication, and support on steep surfaces, it also reduces maneuverability; in cluttered environments the tether will contact obstacles, forming intermediate anchor points. In order for the robot to avoid tether entanglement, it must localize itself with respect to any added anchor points. Accordingly, we present a first approach towards nonvisual localization and mapping that utilizes tether measurements and wheel odometry to jointly estimate vehicle trajectory and tether-to-obstacle contact points. The proposed method is inspired by FastSLAM, where instead of updating a map of landmarks, tether length and bearing measurements are used to update sequential lists of anchor points for every particle representing a belief of the robot's trajectory. Results from both simulation and experiment using our Tethered Robotic eXplorer (TReX) demonstrate that (i) our method is more accurate than odometry alone, and (ii) we are able to map intermediate anchor points nonvisually.

ICRA Conference 2014 Conference Paper

Fully autonomous focused exploration for robotic environmental monitoring

Gregory Hitz
Alkis Gotovos
François Pomerleau
Marie-Eve Garneau
Cédric Pradalier
Andreas Krause 0001
Roland Siegwart

Robotic sensors are promising instruments for monitoring spatial phenomena. Oftentimes, rather than aiming to achieve low prediction error everywhere, one is interested in determining whether the phenomenon exhibits certain critical behavior. In this paper, we consider the problem of focusing autonomous sampling to determine whether and where the sensed spatial field exceeds a given threshold value. We introduce a receding horizon path planner, LSE-DP, which plans efficient paths for sensing in order to reduce our uncertainty specifically around the threshold value. We report fully autonomous field experiments with an Autonomous Surface Vessel (ASV) in an aquatic monitoring setting, which demonstrate the effectiveness of the proposed method. LSE-DP is able to reduce the uncertainty around the threshold value of interest to 68% when compared to non-adaptive methods.

ICRA Conference 2014 Conference Paper

Long-term 3D map maintenance in dynamic environments

François Pomerleau
Philipp Krüsi
Francis Colas
Paul Timothy Furgale
Roland Siegwart

New applications of mobile robotics in dynamic urban areas require more than the single-session geometric maps that have dominated simultaneous localization and mapping (SLAM) research to date; maps must be updated as the environment changes and include a semantic layer (such as road network information) to aid motion planning in dynamic environments. We present an algorithm for long-term localization and mapping in real time using a three-dimensional (3D) laser scanner. The system infers the static or dynamic state of each 3D point in the environment based on repeated observations. The velocity of each dynamic point is estimated without requiring object models or explicit clustering of the points. At any time, the system is able to produce a most-likely representation of underlying static scene geometry. By storing the time history of velocities, we can infer the dominant motion patterns within the map. The result is an online mapping and localization system specifically designed to enable long-term autonomy within highly dynamic environments. We validate the approach using data collected around the campus of ETH Zurich over seven months and several kilometers of navigation. To the best of our knowledge, this is the first work to unify long-term map update with tracking of dynamic objects.

IROS Conference 2013 Conference Paper

3D path planning and execution for search and rescue ground robots

Francis Colas
Srivatsa Mahesh
François Pomerleau
Ming Liu 0001
Roland Siegwart

One milestone for autonomous mobile robotics is to endow robots with the capability to compute the plans and motor commands necessary to reach a defined goal position. For indoor or car-like robots moving on flat terrain, this problem is well mastered and open-source software can be deployed to such robots. However, for many applications such as search and rescue, ground robots must handle three-dimensional terrain. In this article, we present a system that is able to plan and execute a path in a complex environment starting from noisy sensor input. In order to cope with the complexity of a high-dimensional configuration space, we separate position and configuration planning. We demonstrate our system on a search and rescue robot with flippers by climbing up and down a difficult curved staircase.

IROS Conference 2012 Conference Paper

A Markov semi-supervised clustering approach and its application in topological map extraction

Ming Liu 0001
Francis Colas
François Pomerleau
Roland Siegwart

In this paper, we present a novel semi-supervised clustering approach based on Markov process. It deals with data which include abundant local constraints. We apply the designed model to a topological region extraction problem, where topological segmentation is constructed based on sparse human inputs (potentially provided by human experts). The model considers human indications as seeds for topological regions, i. e. the partially labeled data. It results in a regional topological segmentation of connected free space.

ICRA Conference 2012 Conference Paper

Scale-only visual homing from an omnidirectional camera

Ming Liu 0001
Cédric Pradalier
François Pomerleau
Roland Siegwart

Visual Homing is the process by which a mobile robot moves to a Home position using only information extracted from visual data. The approach we present in this paper uses image keypoints (e. g. SIFT) extracted from omnidirectional images and matches the current set of keypoints with the set recorded at the Home location. In this paper, we first formulate three different visual homing problems using uncalibrated omnidirectional camera within the Image Based Visual Servoing (IBVS) framework; then we propose a novel simplified homing approach, which is inspired by IBVS, based only on the scale information of the SIFT features, with its computational cost linear to the number of features. This paper reports on the application of our method on a commonly cited indoor database where it outperforms other approaches. We also briefly present results on a real robot and allude on the integration into a topological navigation framework.

IROS Conference 2012 Conference Paper

The role of homing in visual topological navigation

Ming Liu 0001
Cédric Pradalier
François Pomerleau
Roland Siegwart

Visual homing has been widely studied in the past decade. It enables a mobile robot to move to a Home position using only information extracted from visual data. However, integration of homing algorithms into real applications is not widely studied and poses a number of significant challenges. Failures often occur due to moving people within the scene and variations in illumination. We present a novel integrated indoor topological navigation framework, which combines odometry motion with visual homing algorithms. We show robustness to scene variation and real-time performance through a series of tests conducted in four real apartments and several typical indoor scenes, including doorways, offices etc.

IROS Conference 2011 Conference Paper

Tracking a depth camera: Parameter exploration for fast ICP

François Pomerleau
Stéphane Magnenat
Francis Colas
Ming Liu 0001
Roland Siegwart

The increasing number of ICP variants leads to an explosion of algorithms and parameters. This renders difficult the selection of the appropriate combination for a given application. In this paper, we propose a state-of-the-art, modular, and efficient implementation of an ICP library. We took advantage of the recent availability of fast depth cameras to demonstrate one application example: a 3D pose tracker running at 30 Hz. For this application, we show the modularity of our ICP library by optimizing the use of lean and simple descriptors in order to ease the matching of 3D point clouds. This tracker is then evaluated using datasets recorded along a ground truth of millimeter accuracy. We provide both source code and datasets to the community in order to accelerate further comparisons in this field.