Author name cluster

Ben Kehoe

Possible papers associated with this exact author name in Arrow. This page groups case-insensitive exact name matches and is not a full identity disambiguation profile.

5 papers

1 author row

ICRA Conference 2015 Conference Paper

GP-GPIS-OPT: Grasp planning with shape uncertainty using Gaussian process implicit surfaces and Sequential Convex Programming

Jeffrey Mahler
Sachin Patil
Ben Kehoe
Jur van den Berg
Matei Ciocarlie
Pieter Abbeel
Ken Goldberg

Computing grasps for an object is challenging when the object geometry is not known precisely. In this paper, we explore the use of Gaussian process implicit surfaces (GPISs) to represent shape uncertainty from RGBD point cloud observations of objects. We study the use of GPIS representations to select grasps on previously unknown objects, measuring grasp quality by the probability of force closure. Our main contribution is GP-GPIS-OPT, an algorithm for computing grasps for parallel-jaw grippers on 2D GPIS object representations. Specifically, our method optimizes an approximation to the probability of force closure subject to antipodal constraints on the parallel jaws using Sequential Convex Programming (SCP). We also introduce GPIS-Blur, a method for visualizing 2D GPIS models based on blending shape samples from a GPIS. We test the algorithm on a set of 8 planar objects with transparency, translucency, and specularity. Our experiments suggest that GP-GPIS-OPT computes grasps with higher probability of force closure than a planner that does not consider shape uncertainty on our test objects and may converge to a grasp plan up to 5. 7×faster than using Monte-Carlo integration, a common method for grasp planning under shape uncertainty. Furthermore, initial experiments on the Willow Garage PR2 robot suggest that grasps selected with GP-GPIS-OPT are up to 90% more successful than those planned assuming a deterministic shape. Our dataset, code, and videos of our experiments are available at http://rll.berkeley.edu/icra2015grasping/.

Details

ICRA Conference 2015 Conference Paper

Learning by observation for surgical subtasks: Multilateral cutting of 3D viscoelastic and 2D Orthotropic Tissue Phantoms

Adithyavairavan Murali
Siddarth Sen
Ben Kehoe
Animesh Garg
Seth McFarland
Sachin Patil
W. Douglas Boyd
Susan Lim

Automating repetitive surgical subtasks such as suturing, cutting and debridement can reduce surgeon fatigue and procedure times and facilitate supervised tele-surgery. Programming is difficult because human tissue is deformable and highly specular. Using the da Vinci Research Kit (DVRK) robotic surgical assistant, we explore a “Learning By Observation” (LBO) approach where we identify, segment, and parameterize motion sequences and sensor conditions to build a finite state machine (FSM) for each subtask. The robot then executes the FSM repeatedly to tune parameters and if necessary update the FSM structure. We evaluate the approach on two surgical subtasks: debridement of 3D Viscoelastic Tissue Phantoms (3d-DVTP), in which small target fragments are removed from a 3D viscoelastic tissue phantom; and Pattern Cutting of 2D Orthotropic Tissue Phantoms (2d-PCOTP), a step in the standard Fundamentals of Laparoscopic Surgery training suite, in which a specified circular area must be cut from a sheet of orthotropic tissue phantom. We describe the approach and physical experiments with repeatability of 96% for 50 trials of the 3d-DVTP subtask and 70% for 20 trials of the 2d-PCOTP subtask. A video is available at: http://j.mp/Robot-Surgery-Video-Oct-2014.

Details

ICRA Conference 2014 Conference Paper

Autonomous multilateral debridement with the Raven surgical robot

Ben Kehoe
Gregory Kahn
Jeffrey Mahler
Jonathan Kim
Alex X. Lee
Anna Lee
Keisuke Nakagawa
Sachin Patil

Autonomous robot execution of surgical sub-tasks has the potential to reduce surgeon fatigue and facilitate supervised tele-surgery. This paper considers the sub-task of surgical debridement: removing dead or damaged tissue fragments to allow the remaining healthy tissue to heal. We present an autonomous multilateral surgical debridement system using the Raven, an open-architecture surgical robot with two cable-driven 7 DOF arms. Our system combines stereo vision for 3D perception with trajopt, an optimization-based motion planner, and model predictive control (MPC). Laboratory experiments involving sensing, grasping, and removal of 120 fragments suggest that an autonomous surgical robot can achieve robustness comparable to human performance. Our robot system demonstrated the advantage of multilateral systems, as the autonomous execution was 1. 5× faster with two arms than with one; however, it was two to three times slower than a human. Execution speed could be improved with better state estimation that would allow more travel between MPC steps and fewer MPC replanning cycles. The three primary contributions of this paper are: (1) introducing debridement as a sub-task of interest for surgical robotics, (2) demonstrating the first reliable autonomous robot performance of a surgical sub-task using the Raven, and (3) reporting experiments that highlight the importance of accurate state estimation for future research. Further information including code, photos, and video is available at: http://rll.berkeley.edu/raven.

Details

ICRA Conference 2013 Conference Paper

Cloud-based robot grasping with the google object recognition engine

Ben Kehoe
Akihiro Matsukawa
Sal Candido
James J. Kuffner
Ken Goldberg

Rapidly expanding internet resources and wireless networking have potential to liberate robots and automation systems from limited onboard computation, memory, and software. “Cloud Robotics” describes an approach that recognizes the wide availability of networking and incorporates open-source elements to greatly extend earlier concepts of “Online Robots” and “Networked Robots”. In this paper we consider how cloud-based data and computation can facilitate 3D robot grasping. We present a system architecture, implemented prototype, and initial experimental data for a cloud-based robot grasping system that incorporates a Willow Garage PR2 robot with onboard color and depth cameras, Google's proprietary object recognition engine, the Point Cloud Library (PCL) for pose estimation, Columbia University's GraspIt! toolkit and OpenRAVE for 3D grasping and our prior approach to sampling-based grasp analysis to address uncertainty in pose. We report data from experiments in recognition (a recall rate of 80% for the objects in our test set), pose estimation (failure rate under 14%), and grasping (failure rate under 23%) and initial results on recall and false positives in larger data sets using confidence measures.

Details

ICRA Conference 2012 Conference Paper

Toward cloud-based grasping with uncertainty in shape: Estimating lower bounds on achieving force closure with zero-slip push grasps

Ben Kehoe
Dmitry Berenson
Ken Goldberg

This paper explores how Cloud Computing can facilitate grasping with shape uncertainty. We consider the most common robot gripper: a pair of thin parallel jaws, and a class of objects that can be modeled as extruded polygons. We model a conservative class of push-grasps that can enhance object alignment. The grasp planning algorithm takes as input an approximate object outline and Gaussian uncertainty around each vertex and center of mass. We define a grasp quality metric based on a lower bound on the probability of achieving force closure. We present a highly-parallelizable algorithm to compute this metric using Monte Carlo sampling. The algorithm uses Coulomb frictional grasp mechanics and a fast geometric test for conservative conditions for force closure. We run the algorithm on a set of sample shapes and compare the grasps with those from a planner that does not model shape uncertainty. We report computation times with single and multi-core computers and sensitivity analysis on algorithm parameters. We also describe physical grasp experiments using the Willow Garage PR2 robot.

Details